Evaluation of the seismic behavior of precast concrete buildings with energy dissipating devices

Pablo Mata, Alex H. Barbat, Sergio Oller, Ruben Boroschek

Abstract


The poor performance of some precast structures have limited their use in seismic zones due to their low level of structural damping, P-Δ effects and low ductility of de structural joints. These characteristics allow proposing the use of passive dissipating devices for improving their behavior. The seismic response of two precast buildings is studied in this work. The response of the structures equipped
with energy dissipators is compared with the non-controlled case. The first structure is a low damped industrial precast concrete building with low ductility connecting joints. The second one is a 3D frame typically built in urban areas. The structures are simulated using the Simo’s formulation for beams. Each beam section is meshed in a secondary grid of fibers along the beam axis. The materials of each fiber can be composed of several components having appropriated constitutive laws. The simple mixing theory is used to treat the resulting composite.
A special kind of element is developed for modeling the dissipating devices. The results obtained in this work allow validating the use of passive control for improving the seismic performance of precast structures.


Full Text:

PDF

References


Barbat. A. H, Oller. S, Oñate. E and Hanganu. A. (1997). Viscous damage model for Timoshenko beam structures. International Journal of Solids and Structures. Vol. 34. Nº 30. pp. 3953–3976.

Car. J, Oller. S and Oñate E. (2000). Modelo constitutivo continuo para el estudio del comportamiento mecánico de los materiales compuestos. International Center for Numerical Methods in Engineering, CIMNE, Barcelona, Spain. PhD Thesis. (In Spanish).

Davenne. L, Ragueneau. F, Mazars. J and Ibrahimbegovic. A. (2003). Efficient approaches to finite element analysis in earthquake engineering. Computers and Structures 81. 1223-1239.

Hanganu Alex D., Oñate E. and Barbat A.H. (2002). A finite element methodology for local/global damage evaluation in civil engineering structures. Computers & Structures 80, 1667—1687.

Ibrahimbegovic. A. (1995). On the finite element implementation of geometrically nonlinear Reissner’s beam theory: three-dimensional curved beam elements. Computer Methods in Applied

Mechanic and Engineering. 122, 11-26.

Mata A. P, Barbat A and Oller S. (2004). Improvement of the seismic behavior of precast concrete structures by means of energy dissipating devices. Third European Conference on

Structural Control, 3ECSC. 12-15 July, Vienna University of Technology, Vienna, Austria.

Mata A. P, Oller. S and Barbat A. (2005). Numerical tool for nonlinear seismic analysis of buildings with energy dissipating systems. 9th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, Kobe, Japan, June 13-16.

Mata P., Boroschek R., Barbat A.H. and Oller S. (2006). High damping rubber model for energy dissipating devices. Journal of Earthquake Engineering, JEE, (accepted for publication).

Pampanin S. (2003). Alternative design philosophies and seismic response of precast concrete buildings. Fib. News. Structural Concrete, 4, Nº 4.

Simo. J.C, and Vu–Quoc L. (1985). A finite strain beam formulation, Part I. Computer Methods in Applied Mechanic Engineering. 49, 55–70

Simo. J.C, and Vu–Quoc L. (1986). A three dimensional finite strain rod model, Part II: Computational aspects. Computational Methods in Applied Engineering. 58, 79–116.

Simo. J.C, and Vu–Quoc L. (1988). On the dynamic in space of rods undergoing large motions–A geometrically exact approach. Computer Methods in Applied Mechanic Engineering. 66, 125–


Refbacks

  • There are currently no refbacks.


Copyright (c) 2015 INTERSECTII / INTERSECTIONS

Indexed

Google Scholar    Directory of Research Journals Indexing